5 Port Solenoid Valve

Get a Price/Quote

5 Port Solenoid Valve Specification

Ambient Temperature
-10C to 50C

Protection
IP65

Coil Life
Over 50 million cycles

Mounting
Body Mount and Manifold Mount

Response Time
Less than 30 ms

Lubrication Requirement
Required for enhanced life

Manual Override
Yes, standard

Coil Electrical Duty Cycle
100%

Weight
Approx. 350-500g depending on model

Operation Mode
Continuous duty

Insulation Class
Class F

About 5 Port Solenoid Valve

Buy from us heavy duty 5 Port Solenoid Valve that is commonly used in low to medium pressure flow sections to change the direction of fluid flowing through the valve. This electrically actuated device is capable to bear pressure in between 2.5 to 10 kilograms per square centimeter. It is fabricated by using top-grade alloyed steel that imparts high tensile and compressive strength to bear the impacts of temperature and pressure. Get 5 Port Solenoid Valve from us at a reasonable price range.

Technical details

Types	2 Position & 3 Position , PHN, PRN, PAN.
Sizes	1/8" BSP, 1/4" BSP, 1/2" BSP, M10 x 1.5, M22x 1.5
Pressure	2.5 to 10 kg / cm2 for Pilot & Solenoid Valves.
Orifice	5.00mm for 1/8" BSP, 6.5mm for 1/4" BSP & 12.50 mm for 1/2" BSP.
Media	AIR-Filtered and Lubricated.
Body Material	Powder coated Aluminium body. BRASS and Stainless Steel against Specific orders.
Solenoid Data	Epoxy moulded water proof Continuous duty coils,6 to 230 VAC, 6 to 220 VDC, 6.5 watts. Optional Terminal Junction Box can be provided onall Coils.